Zanussi ZDT24003FA, User Manual

Page: 10 / 20

SETTING AND STARTING A PROGRAMME
The AUTO OFF function
This function decreases energy consumption by deactivating automatically the appliance when it is not
operating.
The function comes into operation:
• 5 minutes after the completion of the programme.
• After 5 minutes if the programme has not started.
Starting a programme
1. Open the appliance door and keep it ajar.
2. Press on/off to activate the appliance. Make
sure the appliance is in the programme
selection mode.
3. Select a programme from the control panel by
pushing a desired programme button.
A related programme indicator is on.
4. Close the appliance door to start the
programme.
The appliance starts working.
Starting programme with Delay option
Make sure the appliance is on and in the
programme selection mode.
1. Select a programme from the control panel.
A related programme indicator is on.
2. Press the button
to delay the programme
start.
The indicator is on.
3. Continue pressing to extend the
countdown (3, 6 or 9 hours).
A related indicator on the control panel indicates
the countdown time.
4. Close the appliance door to start the
countdown.
The programme starts automatically when the
countdown is complete.
How to activate XtraDry
Press and hold simultaneously and until the
indicator
comes on.
If the option is not applicable to the program, the
related indicator does not come on or it flashes
quickly for a few seconds and then goes off.
Opening the door while the appliance operates
Opening the door while a programme is running stops the appliance. It may affect the energy consumption
and the programme duration. After closing the door, the appliance continues from the point of interruption.
If the door is opened during the drying phase, before AirDry automatically opens it, the
programme ends after 30 seconds.
If the door is closed after it is opened automatically by AirDry in the drying phase, the
programme ends after 3 minutes.
Do not try to close the appliance door within 2 minutes after AirDry automatically opens it, as
this may cause damage to the appliance.
End of the programme
When the programme is completed the indicator
is on.
1. Press the on/off button or wait for the AUTO
OFF function to deactivate the appliance. If you
open the door before the activation of AUTO
OFF, the appliance is automatically
deactivated.
2. Close the water tap.
10