ACTIVATING AIRDRY
AirDry improves the drying results with less energy consumption.
By default, AirDry is activated with all programmes excluding
(if applicable) but it is possible to
deactivate it.
While the drying phase operates, the device opens the appliance door. The door is then kept
ajar.
While the appliance is in user mode, within about 5 seconds:
1. Press the programme button twice.
• The indicators and
are on.
• The indicator
flashes.
2. Wait until the indicators and
are off.
• The indicator
is on = AirDry is activated.
3. Press the programme button to change the setting.
• The indicator
is off = AirDry is deactivated.
4. Press the on/off button to confirm the setting.
CAUTION! If children have access to the appliance, it is advised to deactivate AirDry as
opening the door may pose a danger.
BEFORE FIRST USE
1. Make sure that the current level of the
water softener agrees with the hardness
of the water supply. If not, adjust the level
of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any processing
residuals that can still be inside the appliance.
Do not use detergent and do not load the
baskets.
After starting a programme, it may take up to 5
minutes for the appliance to recharge the resin in
the water softener. It seems that the appliance is
not working. The washing phase starts only after
this procedure is completed. The procedure is
repeated periodically.
39
