20
30
A
B
3
20
30
4
Put the detergent or the tablet in compartment
(
A
) If the programme has a prewash phase,
put a small quantity of detergent in compart-
ment (
B
).
Setting and starting a programme
The Auto Off function
To decrease the energy consumption, this
function automatically deactivates the appli-
ance a few minutes after:
• You have not closed the door to start the
programme.
• The programme is completed.
Setting mode
For some settings it is necessary that the ap-
pliance is in setting mode.
The appliance is in setting mode when, after
the activation, the indicator of
is on.
If the control panel does not show this condi-
tion, press and hold, at the same time
and
until the indicator of
comes on.
Starting a programme without delay start
1. Open the water tap.
2. Press the on/off button to activate the ap-
pliance. The indicator of the ECO pro-
gramme comes on.
3. Set a programme.
• If you want to start the ECO programme,
close the appliance door.
• If you want to set a different programme,
press the button of the programme you
want to set. The related programme indi-
cator comes on.
4. Close the appliance door. The programme
starts.
Starting a programme with delay start
1. Set the programme.
2. Press the delay button again and again un-
til the indicator of the number of hours you
want to set comes on (3, 6 or 9).
• The delay indicator comes on.
3. Close the appliance door. The countdown
starts.
• When the countdown is completed, the pro-
gramme starts.
Opening the door while the appliance
operates
If you open the door, the appliance stops.
When you close the door, the appliance con-
tinues from the point of interruption.
Cancelling the delay start while the
countdown operates
When you cancel the delay start you have to
set the programme and options again.
1. Press and hold, at the same time,
and
until the
in-
dicator comes on.
Cancelling the programme
1. Press and hold, at the same time,
and
until the indicator of
comes on.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
At the end of the programme
When the programme is completed, the end
indicator is on.
1. Press the on/off button or wait for the Auto
Off function to automatically deactivate the
appliance.
2. Close the water tap.
8
www.zanussi.com
Summary of Contents for ZDT15010FA
Page 1: ...EN User manual Dishwasher ZDT15010FA ...
Page 14: ...14 www zanussi com ...
Page 15: ...15 www zanussi com ...
