Load the upper basket and the lower basket
and decrease the quantity of detergent.
This option is not applicable to
and
.
Acoustic signals
The acoustic signals operate when the appli-
ance has a malfunction and it is not possible
to deactivate them.
There is also an acoustic signal that operates
when the programme is completed. By default,
this acoustic signal is off, but it is possible to
activate it.
How to activate the acoustic signal for
the end of programme
1. Press the on/off button to activate the ap-
pliance.
2. If necessary, do the Reset function.
3. Press and hold the programme button until
the programme indicator
starts to
flash and the programme indicator
comes on with fixed light.
4. Press immediately the programme button.
•
The programme indicator
comes
on with fixed light.
•
The programme indicator
starts
to flash.
5.
Wait until the programme indicator
goes off. The programme indicator
continues to flash.
6. Press the programme button. The end indi-
cator comes on. The acoustic signal for the
end of programme is activated.
7. Press the on/off button to deactivate the
appliance and to confirm the setting.
How to deactivate again the acoustic
signal for the end of programme
1. Refer to “How to activate the acoustic sig-
nal for the end of programme” and follow
the procedure from step (1) to step (5).
The end indicator is on.
2. Press the programme button. The end indi-
cator goes off. The acoustic signal for the
end of programme is deactivated.
3. Press the on/off button to deactivate the
appliance and to confirm the setting.
Before first use
1. Make sure that the set level of the water
softener agrees with the water hardness in
your area. If not, adjust the water softener.
Contact your local water authority to know
the water hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the appli-
ance. Start a programme to remove them.
Do not use detergent and do not load the
baskets.
40
www.zanussi.com
