Setting the water softener manually (see table)
Set switch to position 1 or
2
The water softener is factory set at position 2.
Setting the water softener electronically (see table)
The water softener is factory set at position 5.
A
B
1. Press the On/Off button. The appliance
must be in
setting mode
.
2. Press and hold
Programme selection/
Cancel
button until programme light
A
flashes and programme light
B
illuminates
with fixed light.
3. After a few seconds:
– programme light
B
turns off
– programme light
A
goes on flashing
–
End of programme
light starts flashing:
the number of flashes corresponds to
current level set. The flashing is repea-
ted with a pause of a few seconds.
Examples: 5 flashes, pause, 5 flashes,
pause, etc... = level 5.
4. To change the level, press the
Programme
selection/Cancel
button. Each time the
button is pressed the level increases (level
1 follows level 10). The
End of pro-
gramme
light indicates the new setting.
5. To memorise the operation, switch off the
dishwasher.
11