1. Press the On/Off button. The dishwasher
must be in setting mode.
2. Simultaneously press and hold function
buttons
B
and
C
until the lights of the func-
tion buttons
A
,
B
and
C
start flashing.
3. Press function button
A
, the lights function
buttons
B
and
C
turn off while the light of
function button
A
goes flashing, at the
same time the
end of programme
indica-
tor light starts to flash, along with a se-
quence of intermittent audible signals. The
current level is indicated by the number of
flashes of the
end of programme
indicator
light with a sequence of intermittent audible
signals and a pause of a few seconds.
Examples:
5 flashes / 5 intermittent audible signals,
pause,
5 flashes / 5 intermittent audible signals,
pause, etc...= level 5
6 flashes / 6 intermittent audible signals,
pause,
6 flashes / 6 intermittent audible signals,
pause, etc...= level 6
4. To change the level press the function but-
ton
A
. Each time button is pressed the level
changes (For the selection of a new level
see the chart).
Examples:
If the current level is 5, by pressing function
button
A
once, level 6 is selected. If the
current level is 10, by pressing button
A
once, level 1 is selected.
5. To memorise the operation, switch off the
dishwasher by pressing the On/Off button.
Filling with dishwasher salt
CAUTION!
Use only special salt suitable for dishwashers.
11
Summary of Contents for ZDT 6454
