Zanussi ZDS 2010S, User Manual

Page: 7 / 16

1 2
3
Put 1 litre of water in
the salt container (on-
ly for the first time).
4
5 6
Filling the rinse aid dispenser
Caution! Only use rinse aid for
dishwashers. Other products can cause
damage to the appliance.
The rinse aid, during the last rinsing phase,
helps to dry the dishes without streaks and
stains.
1 2
-
max
MAX
1
2
3
4
+
-
3 4
To adjust the released quantity of rinse aid,
turn the selector between position 1 (lowest
quantity) and position 4 (highest quantity).
Daily use
1. Open the water tap.
2. Turn the programme knob until the pro-
gramme marker is aligned with the pro-
gramme you want to set. Make sure that the
appliance is in setting mode, refer to “Set-
ting and starting a programme”. Set the cor-
rect programme for the type of load and the
degree of soil.
• If the salt indicator is on, fill the salt con-
tainer.
• If the rinse aid indicator is on, fill the rinse
aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Start the programme.
7
www.zanussi.com