background image

Note: 

The timer function can be set when the unit is operating in Turbo 

Mode.

Dry Mode

Press the Mode button until the Dry indicator light is illuminated

In the Dry mode the humidity level is automatically set at 15% (all 
humidity indicators are off) and the fan is automatically set to high 
speed.

Press the Power button or Mode button to cancel the dryer function.

Caution: 

Do not cover the air outlet with wet clothing, or do not place 

wet clothing above the unit.

Note: 

The dry mode must be operated in a closed room. Do not operate 

with a door or window open

Note: 

Place clothes 30-50cm from the unit for best drying results.

Note: 

The timer function cannot be set when the unit is operating in Dry 

Mode. If the Dry mode is chose after 24 hours the appliance will 
automatically change to Dehumidify mode if there is no operation

Note: 

The humidity cannot be set when the unit is operating in Dry 

Mode.

Continuous Dehumidifier (Extraction) Mode

Press the Mode button on the control panel until the Continuous 
Dehumidifier indicator light is illuminated.

In the Continuous Dehumidifier (Extraction) mode the humidity level 
is automatically set at 15% (all humidity indicators are off).

The unit will continue to run at the maximum extraction rate until 
the water tank reaches the max fill level.

Press the Power button or Mode button to cancel the Continuous 
Dehumidifier (Extraction) mode.

.

USING YOUR DEHUMIDIFIER

Page 11

Summary of Contents for ZDH1802


























Reviews: