• The dishwasher must be switched off.
Switch on the dishwasher by pressing the On/Off
button.
• Press and hold simultaneously function buttons
B
and
C
until the lights of function buttons
A
,
B
and
C
start flashing.
• Release the buttons and then press function button
A
; the lights of function buttons
B
and
C
turn off
while function button
A
goes on flashing. At the
same time
End of programme
light starts to flash.
The number of flashes of the
End of programme
light corresponds to the current level.
• The
End of programme
light might flash 5 times,
for example. The flashing is repeated every 5 sec-
onds.
• To change the level, press function button
A
. Each
time the button is pressed the level increases.
(Level 1 follows level 10).
• The
End of programme
light indicates the new
setting. (For the selection of the new level see the
chart).
• To memorise the operation, switch off the dish-
washer by pressing the On/Off button.
Filling with dishwasher salt
CAUTION!
Use only special salt suitable for dishwashers.
Unscrew the cap.
Only before filling with
salt for the first time
, fill
the salt container with
water.
Using the funnel provi-
ded, pour in the salt until
the container is filled with
salt.
11
Summary of Contents for ZDF401
Page 1: ...User manual Dishwasher ZDF 401 ...
Page 30: ...30 ...
Page 31: ...31 ...
Page 32: ...www electrolux com 156996330 00 22022007 Subject to change without notice ...
