background image

closing the door, the appliance continues from the

point of interruption.

If the door is opened during the drying

phase, before AirDry automatically

opens it, the programme ends after 30

seconds.

If the door is closed after it is opened

automatically by AirDry in the drying

phase, the programme ends after 3

minutes.

Do not try to close the appliance door

within 2 minutes after AirDry

automatically opens it, as this may

cause damage to the appliance.

END OF THE PROGRAMME
When the programme is complete, the display

shows: 0:00.
• Press on/off or wait 5 minutes for the Auto OFF

function to automatically deactivate the

appliance.

• Close the water tap.

If you open the door before the

activation of Auto OFF, the appliance

is automatically deactivated.

HINTS AND TIPS

GENERAL
Follow the hints below to ensure optimal cleaning

and drying results in daily use and to help you

protect the environment.
• Remove larger residues of food from the dishes

into the waste bin.

• Do not pre-rinse dishes by hand. When needed,

select a programme with a prewash phase.

• Always use the whole space of the baskets.

• Make sure that items in the baskets do not

touch or cover each other. Only then can the

water completely reach and wash the dishes.

• You can use dishwasher detergent, rinse aid

and salt separately or you can use the multi-

tablets (e.g. ''All in 1''). Follow the instructions

on the packaging.

• Select a programme according to the type of

load and the degree of soil. 

 offers the

most efficient use of water and energy

consumption.

THE WATER SOFTENER
The water softener removes minerals from the

water supply, which would have a detrimental effect

on the washing results and on the appliance.
The higher the content of these minerals, the harder

your water is. Water hardness is measured in

equivalent scales.
The water softener should be adjusted according to

the hardness of the water in your area. Your local

water authority can advise you on the hardness of

the water in your area. It is important to set the right

level of the water softener to assure good washing

results.

USING SALT, RINSE AID AND DETERGENT
• Only use salt, rinse aid and detergent for

dishwasher. Other products can cause damage

to the appliance.

• In areas with hard and very hard water we

recommend to use plain dishwasher detergent

(powder, gel, tablets containing no additional

agents), rinse aid and salt separately for optimal

cleaning and drying results.

• At least once a month run the appliance with the

use of appliance cleaner which is particularly

suitable for this purpose.

• Detergent tablets do not fully dissolve with short

programmes. To prevent detergent residues on

the tableware, we recommend that you use the

tablets with long programmes.

• Do not use more than the correct quantity of

detergent. Refer to the instructions on the

detergent packaging.

WHAT TO DO IF YOU WANT TO STOP USING

MULTI-TABLETS
Before you start to use separately detergent, salt

and rinse aid do the following procedure.
1. Set the highest level of the water softener.

2. Make sure that the salt and rinse aid containers

are full.

3. Start the shortest programme with a rinsing

phase. Do not add detergent and do not load

the baskets.

4. When the programme is completed, adjust the

water softener according to the water hardness

in your area.

5. Adjust the released quantity of rinse aid.

6. Activate the rinse aid empty notification.

11

Summary of Contents for ZDF36001WA





















Reviews: