21
Testing in accordance with
EN 60704
must be
carried out with appliance fully loaded and
using the test programme (see "Consumption
values").
Test in accordance with
EN 50242
must be
carried out when the salt container and rinse
aid dispenser have been filled with salt and
rinse aid respectively and using the test
programme (see "Consumption values").
Hints for Test Institutes
Full load:
12 standard place settings
Amount of detergent required:
5 g + 25 g (Type B)
Rinse aid setting:
position 4 (Type III)
Upper basket
Cutlery basket
Lower basket
Installation
WARNING!
Any electrical and/or plumbing work required to
install this appliance should be carried out by a
qualified electrician and/or plumber or
competent person.
WARNING!
The dishwasher must not be connected to
open water appliances or instantaneous water
heaters. This dishwasher must be fed with cold
water.
WARNING!
Only use, for connection to the water mains,
new hose-set; old hose-set must not be
reused.
Water connection
cup racks:
position A
156999480en.qxp 3/2/2006 8:11 AM Pagina 21
