1
2
A
3
Put the detergent or
the tablet in compart-
ment (
A
).
A
B
If the programme has
a prewash phase, put
a small quantity of
detergent in compart-
ment (
B
).
4
Detergent tablets do not fully dissolve with
short programmes and detergent residues
can stay on the dishes.
We recommend that you use detergent tablets
with long programmes.
Setting and starting a programme
Setting mode
The appliance must be in setting mode to:
•
Start a programme.
• Set the level of the water softener.
• Activate the rinse aid dispenser when the
Multitab function is on.
Turn the programme knob until the programme
marker is aligned with a programme on the con-
trol panel:
• If the programme duration flashes in the dis-
play, the appliance is in setting mode.
• If the programme duration in the display is
not flashing, the appliance is not in setting
mode.
To put the appliance in setting mode, press and
hold
Start
until the programme duration flashes
in the display and the phase indicators for the
programme come on.
Starting a programme without delay start
1. Open the water tap.
2. Close the appliance door.
3. Turn the programme knob until the pro-
gramme marker is aligned with the pro-
gramme you want to set. Make sure that the
appliance is in setting mode.
• The programme duration flashes in the
display.
• The phase indicators of the set pro-
gramme come on.
4. Press
Start
. The programme starts.
• The programme duration stops flashing in
the display and starts to decrease with
steps of 1 minute.
• Only the indicator of the phase in opera-
tion stays on.
Starting a programme with delay start
1. Set the programme.
2. Press
Delay
again and again until the dis-
play shows the delay time you want to set
(from 1 to 19 hours).
• The delay time flashes in the display.
3. Press
Start
. The countdown starts.
• The delay time stops flashing in the dis-
play. The countdown starts to decrease
with steps of 1 hour.
• The phase indicators of the set pro-
gramme go off.
22
www.zanussi.com
