Covered ventilation grill.
Uncover ventilation grill in base area.
Residue inside the drum.
Clean the drum inside.
High water hardness.
Set suitable water hardness
4)
.
Loading door
does not close
Filters not locked in place.
Install fine filter and/or snap course filter into
place.
Err
(
Error
) on
the LCD.
5)
Attempt to change parameters after start of
the programme.
Turn the dryer off and on. Set requested pa-
rameters.
No drum light
Programme selector in OFF position.
Turn it to DRUM LIGHT (if available) or to
any programme.
Defective light bulb.
Replace light bulb (see next section).
Abnormally
elapsing time
on the LCD
5)
Time to end is calculated on the basis of:
type, volume and dampness of laundry.
Automatic process; this is not a machine
fault.
Programme in-
active
Full water reservoir.
Empty water reservoir
3)
, press START
PAUSE button.
Drying cycle to
short
Small laundry volume./Too dry laundry for
selected programme.
Select time programme or higher drying level
(e.g. EXTRA DRY ).
Drying cycle to
long
6)
Fluff filters clogged.
Clean fluff filters.
To high loading volume.
Respect max. loading volume.
Laundry insufficiently spun.
Spun adequately the laundry.
Particularly high room temperature - no ma-
chine fault.
Lower the room temperature if possible.
1)
In case of error message on the LCD (e.g.
E51
- only dryers with the LCD): Switch the dryer off and on. Set
programme. Press the START PAUSE button. Does not work? - inform local service and quote the error code.
2)
follow program recommendation - see
Programme overview
chapter
3)
see
Care and cleaning
chapter
4)
see
Machine settings
chapter
5)
only dryers with the LCD
6)
Note: After around 5 hours the drying cycle ends automatically (see
Drying cycle complete
section).
Machine settings
Setting
Implementation
BUZZER permanent off
1.
Turn the programme selector to any programme.
2.
Press simultaneously the
DELICATE
and
ANTI-CREASE
buttons
and hold down for approx. 5 seconds.
3.
The buzzer is by default always off.
14
www.zanussi.com