Zanussi ZDC 47203W, User Manual

Page: 10 / 16

ton layer should be outermost). These fabrics
will then dry better.
Important! Do not overload the appliance.
Observe max. loading volume.
Laundry weights
Type of laundry Weight
Bathrobe 1200 g
Napkin 100 g
Quilt cover 700 g
Sheet 500 g
Pillow case 200 g
Type of laundry Weight
Tablecloth 250 g
Towelling towel 200 g
Tea cloth 100 g
Night dress 200 g
Ladies' briefs 100 g
Man's work shirt 600 g
Man's work shirt 200 g
Man's pyjamas 500 g
Blouse 100 g
Men's underpants 100 g
Daily use
Switching machine on
Turn the programme selector to any pro-
gramme. The machine switches on.
Operating
2 1 3
4 5
DELICATE
gentle drying with reduced heat of sensitive fabrics
and temperature-sensitive textiles (e.g. acrylic, vis-
cose) marked on care label with:
ANTI-CREASE
prolongs the anti-crease phase to 90 mins in total.
The laundry remains relaxed and free of creases.
BUZZER
audible confirmation of:
• cycle end
• anti-crease phase start and end
• cycle interruption
• error
DELAY START
allows to delay the start of a drying programme
from minimum of 30 min. to maximum of 20 hours.
Press the Delay Start button repeatedly until the
desired delay start is shown on the display
Starting the programme
Press Start/Pause button to start the dryer after
having selected the programme and the op-
tions. The relevant light will stop flashing. If the
programme selector dial is turned to another
position, when the machine is running, the buz-
zer will sound and the programme phase indi-
cator lights will flash. The drum turns alternately
in both directions during drying.
All drying programmes end with a 10 minute
cooling phase. You may remove the laundry af-
ter this phase.
If the door of the appliance or the small door at
the bottom is opened while the programme is
running, this button must be pressed again af-
ter closing the door in order to restart the pro-
gramme from the point at which it was interrup-
ted. This button must be depressed also after a
power failure and after having reinserted the
water reservoir, if it has been emptied in the
middle of a programme after lighting up of light
Tank .
In both cases the light of the Start/Pause but-
ton flashes to remind you that the start button
needs to be pressed again.
10
www.zanussi.com