Zanussi ZD2888, User Manual, Page: 24 / 28

While the water tank is full, the water tank indicator “ ” will be on. The compressor and the fan will
stop Please empty the water tank. operating.
*Please turn off and unplug the appliance before removing the water tank.
1. Remove the water tank carefully.
2. Empty the water tank.
3. Insert the water tank gently back into the appliance.
1. Turn off and unplug the appliance.
2. Take off the hose stopper. (Fig. 1)
3. Connect the drain hole with an 14mm inner diameter water tube. (Fig. 2)
* Please purchase the water tube.
Note

The water tube may be frozen in cold weather which will affect the drainage.

Please make sure to install the water tube properly and avoid bending. If the drainage is not
smooth, it may cause water leakage and wet the floors or furnitures.
4. Put the tank back to its position. Otherwise, operation cannot be started.
Note

The dehumidifying function will stop immediately after shutdown, but there are a small amount
of water will be discharged from the drain hole. When the appliance is not in use for a prolonged
period, please place
it for one day before package and storage.

Do not use the appliance continuously for a long time in order to avoid overheat and cause
mechanical damage or hazard.
CONTINUOUS DRAINAGE
DRAINAGE INSTRUCTION
Hose Stopper
Water Tube
Fig.1 Fig.2
8