Zanussi ZD 699, Instruction Booklet

Page: 5 / 27

5
5. Half load push button
By pressing this push button, washing can be
confined to a single basket.
The indicator light corresponding to the selected
basket comes on and for some programmes the
prewash phase will be automatically excluded.
This option is useful and economical when only a
few dishes need washing.
Remember to load all the dishes into the selected
basket.
If both indicator lights are off, washing will be
carried out in both baskets.
This option is not available with programmes 1
(Rinse and Hold) and 10 (Plate warmer).
6. Eco drying push button
By pressing this pushbutton you can opt to shorten or
completely eliminate the hot air drying cycle, so
making a considerable energy saving.
Eco drying
No drying
The indicator light corresponding to the selection
will come on.
This option is not available with programmes 1
(Rinse and Hold) and 10 (Plate warmer).
If NO drying is selected the supply of rinse
aid is automatically excluded.
If both indicator lights are off, the full drying
cycle will be carried out.
7. Delay start push button
Allows the start of the programme to be delayed
by a minimum of 1 hour, up to 12 hours.
8. Digital display
9. Programme start push button
This is the last push button to press after
having set the programme and closed the
door.
It starts the programme.
10. Programme phase indicator lights
Each phase is indicated with a symbol:
Prewash/Rinse and Hold
Wash
Rinse
Drying
As soon as you select a washing programme,
this illuminates all the phases the programme
consists of.
As the programme progresses, the phase
under way will illuminate.
At the end of the programme the phase
indicator lights turn off.
Audible signals
Audible signals have been introduced to help
indicate which operations the dishwasher is
performing.
Short "instruction accepted" signal
When any of the pushbuttons are pressed, a
short audible signal informs you that the
machine has accepted the instruction given.
Long "programme run" signal
A continuous audible signal informs you that
the washing programme is starting.
Intermittent "end of programme" signal
An intermittent audible signal informs you that
the wash programme has ended.
"Alarm" intermittent signal
The machine is fitted with a number of alarm
systems to help you determine the cause of
any problems (see "Something not working").
An intermittent audible signal informs you that
an alarm is activated.
T
o deactivate these audible signals, press both
"half load" and "delay start" pushbuttons, after
about 3 seconds 3 short intermittent audible
signals inform you that the audible signals have
been deactivated.
To reactivate these audible signals, press both
"half load" and "delay start" pushbuttons, after
about 3 seconds 3 short intermittent audible
signals inform you that the audible signals have
been activated.
Both operations (to deactivate or
reactivate the audible signals) must be
carried out before starting a washing
programme; the setting will remain
memorised after switching off the
dishwasher.
SO261