background image

1

WARNINGS

It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred, always ensure that the book is left with
the appliance in order that the new owner can get to know the functions of the appliance and
the relevant warnings.
These warnings are provided in the interest of safety. You MUST read them carefully before
installing or using the appliance.

Installation

  This cooker must be installed by qualified

personnel, according to the manufacturer's
instructions.

  Repairs to the appliance should only be

carried out by approved service engineers.

  This cooker is heavy. Take care when

moving it.

  Remove all packaging before using the cooker.

 

Ensure that the electrical supply complies
with the type stated on the rating plate.

  Do not attempt to modify the cooker in any

way.

Child Safety

  This cooker is designed to be operated by

adults. Do not alow children to play near or
with the cooker.

  The cooker gets hot when it is in use and

retain their heat for a long period after use.
Children should be kept away until it is has
cooled.

  Children can also injure themselves by pulling

pans or pots off the cooker.

During use

  This cooker is intended for domestic cooking

only. It is not designed for commercial or
industrial purposes.

  Do not use this cooker if it is in contact with

water. Do not operate the cooker with wet
hands.

 

The grill pan will become hot during use,
always use oven gloves when removing or
replacing a hot grill pan.

 

During use the appliance becomes hot.
Care should be taken to avoid touching
heating elements inside the oven.

  Ensure the control knobs are in the ‘OFF’

position when not in use.

 When using other electrical appliances,

ensure the cable does not come into contact
with the hot surfaces of the cooker.

  Never leave the cooker unattended when

cooking with oil and fats.

  This cooker should be kept clean at all times.

A build-up of fats or foodstuffs could result in
a fire.

 Only

 

clean this oven in accordance with the

instructions.

  Do not use the hob as a work surface or for

storage.

  Do not use the cooking zones with empty

pans, or without pans.

Ceramic glass is insensitive to temperature
shock and very robust, however it is not
unbreakable. Hard and sharp objects, in
particular, can damage the cooking surface
if they fall on it.

  Do not use cast iron pans or pans with

damaged bases that are rough or burred.
Scratching may occur when the pans are slid.

  Ensure that liquids containing acids, e.g.

vinegar, lemon or scale remover do not come
into contact with the hob frame, otherwise
matt spots will appear.

  If sugar or a dish containing sugar comes

into contact with a hot cooking zone and then
melts, remove the soiling immediately whilst
still hot using a scraper.

  Keep all items and materials that can melt

away from the ceramic glass surface, e.g.
plastics, aluminium foil, or oven foils. If
something of this nature should melt onto the
ceramic glass surface, it must also be
removed immediately using the scraper.

  Use only pans with flat bases without rough

edges to avoid remaining scratches.

  Never use plastic dishes in the oven. Never

line any part of the oven with aluminium foil.

  Always ensure that the oven vent which is

located at the centre back of the hob is left
unobstructed to ensure ventilation of the
oven cavity.

Service

  This cooker should only be repaired or

serviced by an authorised Service Engineer
and only genuine approved spare parts
should be used.

 Environmental Information

 After installation, please dispose of the

packaging with due regard to safety and the
environment.

  When disposing of an old appliance, make it

unusable, by cutting off the cable.

Summary of Contents for ZCV5600


















Reviews: