Activating the child safety lock
1.
Make sure that the hob is deactivated.
There must be no symbols shown in the
control panel, except for
/
/
.
2.
Touch
for 4 seconds. The symbol
flashes in the control panel.
3.
Touch
while the symbol
flashes.
4.
The display shows
for 4 seconds. The
child safety lock is activated.
To deactivate the child safety lock, do the
steps again. The display shows
for 4
seconds. The child safety lock is deactivated.
Deactivating the child safety lock for one
cooking session
1.
Activate and deactivate the necessary
cooking zone.
2.
While the display shows
, touch
un-
til the display shows
.
3.
Set the heat setting for the cooking zone
in less than 4 seconds.
4.
When you deactivate the hob, the child
safety lock operates.
Automatic switch-off
The hob deactivates automatically if:
• All cooking zones are deactivated
.
• You spill something or put something on the
hob control panel for more than 10 seconds
(a pan, a cloth, etc.). An acoustic signal
sounds and the hob deactivates. Remove
the object or clean the control panel.
• The hob becomes too hot (e.g. when a sau-
cepan boils dry). Before you use the hob
again, the cooking zone must be cool.
• You use incorrect cookware. The display
shows the symbol
and the cooking zone
deactivates automatically after 2 minutes.
• You do not deactivate a cooking zone or
change the heat setting. After some time
(see the table), the display shows the sym-
bol
and the hob deactivates.
Heat setting
Switch-off time
-
6.0 h
-
5.0 h
4.0 h
-
1.5 h
Hob - Helpful hints and tips
Warning!
Refer to the Safety chapters.
Cookware for induction cooking zones
Important!
In induction cooking, a powerful
electromagnetic field almost instantly
generates heat inside the cookware.
Cookware material
•
Correct:
cast iron, steel, enamelled steel,
stainless steel, a multi-layer bottom (marked
as correct by the manufacturer).
•
Incorrect:
aluminium, copper, brass, glass,
ceramic, porcelain.
Cookware is correct for an induction hob
if:
• Water boils very quickly on a zone set to the
highest heat setting.
• You can attach a magnet to the bottom of
the cookware.
The bottom of the cookware
must be
as thick and flat as possible.
Cookware dimensions
: induction cooking
zones adapt to the dimension of the bottom of
the cookware automatically to some limit. But
the magnetic part of the bottom of the cook-
ware must have a minimum diameter.
Cooking zone
Minimum cookware
diameter [mm]
Right rear —
180 mm
145
Right front —
180 mm
145
11
www.zanussi.com
Summary of Contents for ZCI68300WA
Page 1: ...EN User manual Cooker ZCI68300WA ZCI68300XA ZCI68300BA ...
Page 25: ...25 www zanussi com ...
Page 26: ...26 www zanussi com ...
Page 27: ...27 www zanussi com ...
