Problem
Possible cause
Remedy
The oven does not heat up.
The necessary settings are not
set.
Make sure that the settings are
correct.
The turnspit does not rotate.
The turnspit is not correctly in-
stalled into the turnspit hole.
Refer to "Using the turnspit".
It takes too long to cook the
dishes or they cook too quickly.
The temperature is too low or too
high.
Adjust the temperature if neces-
sary. Follow the advice in the
user manual.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
Installation
WARNING!
Refer to Safety chapters.
Location of the appliance
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
Keep a distance of about 1 cm
between the appliance and the back
wall to make sure that the lid opens.
For minimal distances for fitting check the table.
A
C
D
D
B
Minimum distances
Dimension
mm
A
400
20
www.zanussi.com
Summary of Contents for ZCG61246XA
Page 1: ...EN ZCG61246XA User Manual Cooker EG ...
Page 27: ...www zanussi com 27 ...
