background image

34

CONTENTS

Warnings 

33

Use 

35

Control panel

35

Cleaning the interior 

35

Operation

35

Temperature regulation

35

Fresh food refrigeration

35

Movable shelves

36

Positioning the door shelves

36

Hints

36

hints for refrigeration

36

Maintenance

37

Periodic cleaning

37

Periods of no operation

37

Interior light

37

Defrosting

37

Customer service and spare parts

38

Installation

38

Location

38

Rear spacers

38

Electrical connection

39

Changing the opening direction of the doors

40

¥

Do not place carbonated or fizzy drinks in the
freezer as it creates pressure on the container,
which may cause it to explode, resulting in
damage to the appliance. Do not use a
mechanical device or any artificial means to
speed up the thawing process other than those
recommended by the manufacturer. Never use
metal objects for cleaning your appliance as it
may get damaged.

Installation

¥  During normal operation, the condenser and

compressor at the back of the appliance heat up
considerably. For safety reasons, minimum
ventilation must be as shown in the relevant
Figure.

Attention: keep ventilation openings clear of
obstruction.

¥  Care must be taken to ensure that the appliance

does not stand on the electrical supply cable.

Important: 

if the supply cord is damaged, it must

be replaced by a special cord or assembly
available from the manufacturer or its service
agent.

¥  There are working parts in this product which

heat up. Always ensure that there is adequate
ventilation as a failure to do this will result in
component failure and possible food loss. See
installation instructions.

¥  Parts which heat up should not be exposed.

Wherever possible the back of the product
should be against a wall.

¥  If the appliance has been transported

horizontally, it is possible that the oil contained in
the compressor flows in the refrigerant circuit. It
is advisable to wait at least two hours before
connecting the appliance to allow the oil to flow
back in the compressor.

Environment Protection

This appliance does not contain gasses which
could damage the ozone layer, in either its
refrigerant circuit or insulation materials. The
appliance shall not be discarded together with
the urban refuse and rubbish. Avoid damaging
the cooling unit, especially at the rear near the
heat exchanger. Information on your local
disposal sites may be obtained from municipal
authorities. The materials used on this appliance
marked by the symbol  

are recicable.

Summary of Contents for ZC 245 RM










Reviews: