24
Cleaning the hinged grill
This model has been fitted with a hinged grill element
to enable you to clean the roof of the oven easily.
Before proceeding ensure the oven is
cool and is isolated from the electricity
supply.
1) Undo the screw which holds the grill in place
(see diagram).
FO 0781
FO 0778
2) Then gently pull the grill downward to allow
access to the oven roof (see diagram).
3) Clean the oven roof with a suitable cleaner
and wipe dry before replacing the hinged grill
element.
4) Gently push up the grill element into place
and firmly screw into place the holding nut.
Ensure the grill holding nut is firmly in place
to avoid the grill falling down when in use
Replacing the Oven Light
FO 0287
If the oven bulb needs replacing, it must comply with
the following specifications:
- Electric power: 15W,
- Electric rate: 230-240 V (50 Hz),
- Resistant to temperatures of 300
°
C,
- Connection type: E14.
These bulbs are available from your local Zanussi
Force Service Centre.
To replace the faulty bulb:
1. Ensure the oven is isolated from the electrical
supply.
2. Turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with the
new one.
4. Refit the glass cover.
5. Restore the electrical supply.
☞
