37
Once the oven has been installed:
a) set the thermostat knob to MAX and switch the oven
function control knob to conventional cooking
;
or
b)
set the oven control knob to MAX (250);
c) allow the oven to run empty for approximately
45 minutes;
d) open a window for ventilation.
During this time, an unpleasant odour may be emitted.
Fig. 5
Fig. 3
5
10
15
30
45
60
75
90
FO 2480
FO 0799
When the oven is first installed
F
Thermostat control knob (Fig. 2)
Turn the thermostat control knob clockwise to select
temperatures between 50°C and 250°C (MAX).
Hotplate control knobs
The Control Knobs for the hotplates (Fig.3) can be found
on the oven control panel. The energy regulator of the
hotplates can be set by means of a 7-position control
knob:
0
= Off
1
= Minimum
3
= Maximum
The intermediate positions give an increasing heating
power.
Carefully supervise cookings with oil or fats, since
these types of food can result in a fire, when over-
heated.
End of cooking programmer
(Fig. 3)
This device allows you to make the oven switch off
automatically once the preset time is over. An acoustic
signal will be heard when the cooking time is completed.
The cooking duration time can be set up to 90 minutes
maximum.
Turn the timer knob on to set the oven on manual
operation. Turn the timer knob clockwise to set the
required cooking time. Then place food in the oven and
turn the oven function control knob and the thermostat
control knob on the required settings. When cooking time
is over, an acoustic alarm will sound and the oven will
switch off automatically.
The Safety Thermostat
This oven is provided with a safety thermostat. In case of
malfunctioning of the main thermostat, and consequent
over-heating, the safety device will stop the power supply
to the appliance. If this happens, call your local Service
Centre. Under no circumstances should you attempt to
repair the appliance yourself.
Cooling fan (only in some models)
The purpose of the fan is to cool the control panel, the
knobs and the oven door handle. The air stream flows
out between the control panel and the oven door handle.
To ensure proper cooling, the fan will continue to ope-
rate even after the oven is turned off, until normal tem-
perature levels have been reached.
0
1
2
3
FO 2165
Fig. 4
100
150
200
MAX
50
FO 2114
Fig. 2
ZBN 722 - ZHM 726
ZHN 722 - ZHM 726
ZHM 726
This is absolutely
normal
, and is caused by residues of
manufacturing.
Once this operation is carried out, let the oven cool down,
then clean the oven cavity with a soft cloth soaked in warm
soapy water.
Before cooking for the first time, carefully wash the
shelf
and the
dripping pan.
To open the oven door, always catch the
handle in its central part (Fig. 5).
