Zanussi ZBB27650SA, User Manual

Page: 15 / 20

7
Fix the appliance
to the side of the
kitchen unit, fit the
bracket (E) and (F),
adjust the distance,
and fix using the
screws (as in figure).
Fit the cover (D).
Ha Hb
Hd Hc
8
Disconnect the
parts (Ha), (Hb), (Hc)
and (Hd).
21 mm
21 mm
~50 mm
~50 mm
90
o
90
o
9
Install the part
(Ha) on the inner side
of the kitchen furni-
ture.
Ha
Hc
10
Push the part (Hc)
on the part (Ha).
Hb
Ha
8 mm
11
Open the appli-
ance door and the
kitchen furniture door
at an angle of 90°.
Insert the small
square (Hb) into
guide (Ha).
Put together the ap-
pliance door and the
furniture door and
mark the holes.
Ha
8 mm
K
12
Remove the brack-
ets and mark a dis-
tance of 8 mm from
the outer edge of the
door where the nail
must be fitted (K).
Hb
13
Place the small
square on the guide
again and fix it with
the screws supplied.
Align the kitchen fur-
niture door and the
appliance door by ad-
justing the part Hb.
Hb
Hd
14
Press the part
(Hd) on the part (Hb).
Do a final check to make sure that:
• All screws are tightened.
• The magnetic sealing strip is attached tightly
to the cabinet.
Important! If the ambient temperature is low
(for example, in the Winter), the size of the
gasket decreases. The size of the gasket
increases when the ambient temperature
increases.
15
www.zanussi.com