ACTIVE BLAST CHILLER / FREEZERS
100 KG-20 GN 1/1
DCB04
2009-09-23
The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
WATER REMOTE UNIT FOR C/FREEZER CW 100KG
880035
TROLLEY FOR 20X1/1 ROLL-IN RACK
922132
922132
PRINTER FOR HACCP BASIC VERSION
881532
881532
KIT HACCP EKIS
922166
922166
KIT HACCP ADVANCED CONNECT. BC/BCF LW+CW
880183
880183
KIT 3 SINGLE SENSOR PROBES FOR BC/BCF
880269
880269
BASE FOR 20X1/1 ROLL-IN RACK
922141
922141
AIR/WATER REMOTE UNIT F.BC+BCF LW 100KG
880059
AIR REMOTE UNIT CHILL+C/FREEZER CW 100KG
880031
80MM PITCH ROLL-IN RACK 14X1/1GN
922205
922205
60-MM PITCH ROLL-IN RACK FOR 20X1/1
922203
922203
3-SENSOR PROBE FOR C/FREEZER
880088
880088
2 SINGLE SENSOR PROBES C/FREEZER
880096
880096
1 SINGLE SENSOR PROBE C/FREEZER
880089
880089
BCF100A
110022
BCF100RA
110024
ACCESSORIES
MODELS
OPTIONAL ACCESSORIES
�
The control unit provides several
operating settings: time/core
temperature according to NF and UK
regulations, time/air
temperature/probe personalised
according to national regulations,
sterilizing cycle: UV lamps built-in
(on request), 3 single sensor or
3-sensor temperature probes (as
accessory), ideal for meats,
automatic defrosting and manual
defrosting. All parameters are
programmable.
�
The control unit provides two large
displays to read out: time, core
temperature, residual time, alarms,
service information.
�
Two customizable cycles for each
operating modes, allowing setting
time and air temperature. These two
programs (P1-P2) can be converted
into ice-cream specialist cycles
(shape maintenance and holding).
�
All information related to the
different operating models are
recorded: date, time, cycle, core
temperature, holding temperature,
HACCP accordance.
�
An audible alarm starts when the
cycle ends or terminates abnormally.
�
Chilling times can vary according
to food quantity, density, moisture
contents and type of containers.
�
Internal and external finishing in
304 AISI stainless steel and
backpanel in galvanized steel.
�
HCFC, CFC and HFC free
insulation (Cyclopentane), HCFC
and CFC free refrigerant gas
(R404a).
�
Developed and produced in ISO
9001 and ISO 14001 certified
factory.
�
Inner cell with rounded corners.
�
Door equipped with removable
magnetic gasket with hygienic
design.
�
Evaporator with antirust
protection.
�
Ventilator swinging panel foreasy
access to the evaporator.
�
Automatic heated door frame.
�
Hot gas defrosting system (on
built-in models) or electric defrosting
system (on remote models).
�
Thermostatic expansion valve to
optimize the cooling unit efficiency.
�
Adjustable feet 150 mm high.
�
Stand alone printer as accessory.
�
PC connection as accessory, gate
RS 485. No water connections
required: Waste water can be
plumbed into drain, but can also be
collected in an optional waste
container.