3
CONTENTS
2222 183-71
Instructions for the User
Important Safety Information
2
Description of the Appliance
4
Operation
5
Before using
5
Control panel
5
Start your appliance
5
Temperature control
5
Freezing fresh food
6
Frozen food storage
6
Thawing
7
Making ice cubes
7
Cold accumulators
7
Fresh food refrigeration
6
Movable shelves
8
Positioning the door shelves
8
Drawer
8
Cool Check Guide
9
Freezing calendar
9
Hints and Tips
10
Maintenance and Cleaning
11
Internal cleaning
11
External cleaning
11
When the appliance is not in use
11
Changing the light bulb
11
Defrosting
12
Something Not Working
13
Service and Spare Parts
14
Customer Care
14
Guarantee Conditions
15
Instructions for the
Installer
Technical Specification
16
Installation
17
Positioning
17
Rear Spacers
17
Electrical Connection
18
Door Reversal
19
18
Electrical connections
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
The manufacturer declines any liability should
this safety measure not be observed.
If the plug that is fitted to your appliance is not
suitable for your socket outlet, it must be cut off and
the appropriate plug fitted.
Remove the fuse from the cut off plug.
The cut off plug should then be disposed of to
prevent the hazard of shocks in case it should be
plugged into a 13amp socket in another part of your
home.
Important
The wires in the mains lead are coloured in
accordance with the following code:
Green and Yellow - Earth
Blue - Neutral
Brown - Live
If you fit your own plug, the colours of the wires in
the mains lead of your appliance may not correspond
with the markings identifying the terminals in your
plug, proceed as follows:
Connect the Green and Yellow (earth) wire to the
terminal in the plug which is marked with the letter
«E» or the earth symbol
or coloured green and
yellow.
Connect the blue (neutral) wire to the terminal in the
plug which is marked with the letter «N» or coloured
black.
Connect the brown (live) wire to the terminal in the
plug which is marked with the letter «L» or coloured
red.
D207
GREEN & YELLOW
13 AMP. FUSE
BROWN
CORD CLAMP
BLUE
13
AMP
The plug moulded onto the lead incorporates a fuse.
For replacement, use a 13amp BSI362 fuse. Only
ASTA or BSI approved fuses should be used.
The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured
insert at the base of the plug.
A replacement cover/carrier must be obtained from
your local Service Force Centre.
This appliance complies with the E.E.C. Directive
No. 87/308 of 2.6.87 relative to radio interference
suppression.
This appliance complies with the following
E.E.C. Directives:
-
73/23 EEC of 19.2.73
(Low Voltage Directive)
and subsequent modifications;
-
89/336 EEC of 3.5.89
(Electromagnetic
Compatibility Directive) and subsequent
modifications.
Please ensure that when the appliance is
installed it is easily accessible for the engineer in
the event of a breakdown.
