Zanussi Z716WT83BI, User Manual

Page: 16 / 52

16-22 mm
22±1,5 mm
449
mm
595-598 mm
Ø 35 mm
12,5 - 14 mm
Set the position of the lower hole respecting dimen-
sions and distances shown in the drawing (449
mm).
Countersink the holes.
A
Hinges
To mount the hinges it is necessary to drill two holes
(dia. 35 mm, depth 12.5 - 14 mm depending on the
depth of cupboard door) on the inner side of the
door.
The hinges will be fixed to the door by means of the
four supplied screws A.
max. 105°
To align the door perfectly, make sure
that the edge of cupboard door is par-
allel with the appliance edge and to re-
spect the proper opening angle (max.
105 °).
Mounting the door
Fix the hinges to the hinge supports on the appli-
ance by means of the two supplied screws B.
The hinges can be adjusted to compen-
sate for possible uneven thickness of
the door.
16