25
ENGLISH
• The door will not open:
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning,
make a note of the model, serial number and
purchase date of your machine: the Service Centre
will require this information.
• The programme is still running.
• The door lock has not been released.
• There is water in the drum.
• Unsatisfactory washing
results:
• Too little detergent or unsuitable detergent has
been used.
• Stubborn stains have not been treated prior to
washing.
• The correct temperature or programme was not
selected.
• Excessive laundry load.
• Detergent residue is left after
the wash cycle:
• This is most problaby due to non soluble
components contained in modern detergents. It is
not a sign of inadequate rinsing.
Brush or shake the garments and, if necessary,
wash them again.
• Foam remains after the last
rinse:
• Modern detergents can produce foam even after
rinsing, but this will not affect the quality of the
wash.
• The machine makes an
unusual noise:
• The machine is fitted with a type of motor which
makes an unusual noise compared with other
traditional motors. This new motor ensures a
softer start and more even distribution of the
laundry in the drum when spinning, as well as
increased stability of the machine.
Problem
Possible cause
Mod. ..........
Prod. No. ...........
Ser. No. .........
Mod.
..........
Ser.
P0042
• The machine does not dry or
the laundry is not dry enough:
•
The drying time has not been selected.
•
The tap is closed.
•
The drain filter is blocked.
•
A suitable drying time in the correct sector has
not been selected.
•
The drum is overloaded.
Summary of Contents for WJS 1272
Page 26: ...Z ...
