background image

32

4. Select the temperature and the

desired option

Turn the dial to the required setting and depress
button if 

required.

5. Select the programme and start the

machine

Turn the programme selector dial 

clockwise

to the

required programme and press the ON/OFF button

: the mains on light comes on and the machine

starts to operate.

6. At the end of the programme

The machine stops automatically. 

If you have selected a programme which ends with
the water of the last rinse left in the tub, drain the
water before opening the door. Select programme

P

” (drain) or “

J

” (short spin).

Wait one or two minutes before opening the door to
give the electric locking mechanism time to release
it.

Depress the ON/OFF button 

again to switch the

machine off. The mains on light goes out.

Remove the laundry.

Turn the drum by hand to make sure it is completely
empty, so as to avoid any forgotten items being
damaged in a subsequent wash (e.g. shrinking) or
their colour running into a load of whites. 

Release button 

if it has been pressed.

Turn the water tap off and unplug the machine.

Leave the door ajar to air the machine.

P0414S

P0451

A

P0450

90°

Operating sequence

Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C, with
the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.

Washing only

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,
shaking them out as much as possible.

Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment 

.

If you wish to carry out a programme with prewash,
pour detergent into the appropriate compartment
marked .

3. Measure out the additives

If required, pour fabric softener into the compartment
marked 

, and bleach into the compartment

marked 

without exceeding the «MAX» mark.

P0222S

P0223S

P0004

P0178

132995220.qxd  12/17/01  4:19 PM  Pagina  32    (Nero/Process Black pellicola)

Summary of Contents for WDD 1022





















Reviews: