Zanussi IT 5614, Instruction Booklet

Page: 21 / 24

21
This dishwasher is designed to be fitted under a
kitchen counter or worksurface.
It is essential that the recess dimensions indicated in
the diagram are followed.
No further openings for venting of the dishwasher are
required, but only to let the water fill and drain hose
and power supply cable pass through.
The recess height may be anywhere between 820 and
880 mm from the floor as the dishwasher incorporates
adjustable feet (max 60 mm).
A distance of 2 mm should be allowed between the
top of the dishwasher and the counter top.
Insert the machine after adjusting height and levelling
with the adjustable feet. When inserting the machine,
ensure that the water inlet and drain hoses are not
kinked or squashed.
Levelling
Good levelling is essential for correct closure and
sealing of the door. When the appliance is correctly
levelled, the door will not catch on the levelling
spacers, either side of the cabinet.
If the door does not close correctly, loosen or tighten
the adjustable feet until the machine is perfectly level.
The furniture door
The door on this appliance is designed for the overlay
of a panel having the following dimensions:
Width 446 mm
Height 644 - 714 mm max
Thickness 20 mm max
Weight 1.5 - 6 kg max
The height of the panel depends on the height of
adjacent kitchen units (see kitchen plinth adjustment).
The panel height should be no more than
indicated, otherwise complete opening of
the door will not be possible as the furniture
door panel will hit against the dishwasher
plinth.
818
÷
878
550
446
450
820
÷
880
II24
Building-in