43
P
O
R
T
UGU
Ê
S
Unsatisfactory washing results:
■
Too little detergent or unsuitable detergent has
been used.
■
Stubborn stains have not been treated prior to
washing.
■
The correct temperature was not selected.
The machine vibrates or is noisy:
■
Check that all the transit bolts and packing have
been removed.
■
Check that the machine is not resting against any-
thing.
■
Check that the support feet are resting firmly on
the ground and that the lock nuts are securely
tightened.
■
Check that the laundry is evenly distributed in the
drum.
■
Maybe there is very little laundry in the drum.
If you are unable to identify or solve the problem, con-
tact our service centre. Before telephoning, make a
note of the model, serial number and purchase date of
your machine: the Service Centre will require this
information.
Problems which you can resolve yourself
The machine does not start up:
■
Check that the door is firmly closed.
■
Check that the machine is plugged in and that
there is power at the socket.
■
Check that the main fuse has not blown.
■
Check that the programme selector dial is posi-
tioned correctly and the ON/OFF button depressed.
The machine does not fill:
■
Check that the water tap is open.
■
Check that water is coming out of the tap.
■
Check that the inlet hose is not squashed or
kinked.
■
Check that the filter in the inlet hose is not blocked.
■
Check that the door is closed.
The machine fills then empties immedi-
ately:
■
The end of the drain hose is too low. Refer to rele-
vant paragraph in “water drainage” section.
The machine does not empty and/or does
not spin:
■
Check that the drain hose is not squashed or
kinked.
■
The drain filter is blocked. Clean it.
■
A programme with the “Rinse hold” option has
been selected.
■
Check that the laundry is evenly distributed in the
drum.
There is water on the floor:
■
Too much detergent or unsuitable detergent (cre-
ates too much foam) has been used.
■
Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this
as the water runs down the hose; check to see if it
is damp.
■
Check that the drain hose is not damaged.
■
Check that the drain filter has been refitted correct-
ly after cleaning.
SOMETHING NOT WORKING?
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042
Rating plate
Summary of Contents for FLI 1003
Page 16: ...Z ...
