manualshive.com logo in svg

Zanussi FL501, Instruction Booklet

Share
Download
Zanussi FL501 Instruction Booklet Download Page 15

15

Installation Instructions

Technical Specifications

It is dangerous to alter the specifications or

attempt to modify this product in any way.

Care must be taken to ensure that the appliance

does not stand on the electrical supply cable.

Any electrical work required to install this

appliance should be carried out by a qualified
electrician or competent person.

Any plumbing work required to install this

appliance should be carried out by a qualified
plumber or competent person.

DIMENSIONS Height 

85 

cm

Width 60 

cm

Depth 55 

cm

POWER SUPPLY VOLTAGE 

220-230 V/50 Hz

MAX. POWER ABSORBED 

2200 W (10A)

WATER PRESSURE 

Minimum

5 N/cm

2

Maximum 80 

N/cm

2 

MAXIMUM RECOMMENDED LOAD 

Cotton, linen 

5 kg

Synthetics

2 kg

Delicate fabrics 

2 kg

Wool

1 kg

SPIN SPEED 

Maximum 

500 rpm

This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

Summary of Contents for FL501





















Reviews:

No comments

Brands by name

Popular brands

Load more brands