background image

In the event of your appliance requiring service, or if you wish
to purchase spare parts please contact your local Service
Force Centre by telephoning:

08705 929929

Your telephone call will be automatically routed to the Service
Force centre covering your post code area. 

For the address of your local Service Force Centre and further
information about Service Force, please visit the website at
www.serviceforce.co.uk

Before calling out an engineer, please ensure you read the
details under the heading Something not working.

When you contact the Service Force Centre you will need to
give the following details:

1. Your name, address and post code

2. Your telephone number

3. Clear and concise details of the fault

4. The model and serial number (found on the rating plate)

5. The purchase date

Please note that a valid purchase receipt or guarantee
documentation is required for in-guarantee service calls.

For Customer Service in Ireland please contact us at the
address below:

Zanussi
Electrolux Group (Irl) Ltd
Long Mile Road
Dublin 12
Republic of Ireland

Tel: + 353 (0)1 4090751

Email: [email protected]

Customer Care
Department

For general enquiries concerning your Zanussi appliance or for
further information on Zanussi products please contact our
Customer Care Department by letter or telephone at the
address below or visit our website at www.zanussi.co.uk

Customer Care Department
Zanussi
55-77 High Street
Slough
Berkshire
SL1 1DZ
Tel: 08705 727727 (

*

)

*

calls to this number may be recorded for training purposes

If after all these checks, the problem persists, contact your
local Service Force Centre, quoting the model (Mod.), product
number (PNC) and serial number (S.N.). 
This information can be found on the rating plate located on
the side of the dishwasher door (see picture).

So that you always have these numbers at hand, we
recommend you to make a note of them here:

Mod. : . . . . . . . . . . . . . . . . . . 

PNC : . . . . . . . . . . . . . . . . . . 

S.N. : . . . . . . . . . . . . . . . . . . 

This product should be serviced by an authorised service
engineer, and only genuine spare parts should be used.
Under no circumstances should you attempt to repair the
machine yourself. 
Repairs carried out by inexperienced persons may cause injury
or serious malfunctioning. Contact your local Service Force
Centre.
Always insist on genuine spare parts.

14

RA08

Service and Spare Parts

Summary of Contents for ESL 6114





















Reviews: