Zanussi EHC 650 X, Installation And Operating Instructions Manual

Page: 7 / 32

7
Removing deposits
1.
Place a scraper on the glass ceramic surface at an
angle.
2.
Remove residues by sliding the blade over the sur-
face.
3.
Wipe the appliance with a damp cloth and a little
washing up liquid.
4.
Rub the appliance dry using a clean cloth.
*Scrapers and cleaners for glass ceramic and stainless steel
can be purchased in specialist shops
3
Remove stubborn residues with a cleaner for
glass ceramic or stainless steel.
3
Scratches or dark stains on the glass ceramic
that cannot be removed do not however affect
the functioning of the appliance.
What to do if
…
If you are unable to remedy the problem by fol-
lowing the above suggestions, please contact
your dealer or the Customer Care Department.
1
Warning! Repairs to the appliance are only to
be carried out by qualified service engineers.
Considerable danger to the user may result
from improper repairs.
3
If the appliance has been wrongly operated,
the visit from the customer service technician
or dealer may not take place free of charge,
even during the warranty period.
Remove
Type of dirt
immedi-
ately
when the appliance has
cooled down
using
sugar, food containing sugar yes ---
a scraper*
plastics, tin foil yes ---
limescale and water rings --- yes
cleaner for glass ceramic
or stainless steel*
fat splashes --- yes
shiny metallic discolorations --- yes
Problem Possible cause Remedy
The cooking zones are not func-
tioning. The desired heat setting is not set. Set the heat setting.
The fuse in the house’s electrical
wiring (fuse box) has been tripped. Check the fuse.
If the fuses trip a number of times,
please call an authorised electri-
cian.
The residual heat indicator is not
displaying anything The cooking zone was only on for a
short time and is therefore not hot If the cooking zone is supposed to
be hot, call the Customer Service
Department.