Dimensions
Width
60cm
Height with worktop
85 cm
Height without worktop
82 cm
Max depth
61 cm
Max depth with open door
115.2 cm
Electrical connection
Voltage
220/240 V - 50 Hz
Motor rating during wash
200 W
Power of heating element
2100 W
Overall power
2300 W
Water supply pressure
Minimum
50 kPa (0.5 bar)
Maximum
800 kPa (8 bar)
Capacity
12 place settings
Technical specifications
6
Adjusting the worktop
You can move the worktop forward or backward by
25 mm in order to align the machine with other kitchen units.
Simply unscrew the two rear retaining screws, move the top to
the required position and then retighten the screws.
Fitting under a counter
(kitchen worktop or sink)
By removing the machine’s
worktop, you can install it
under a close fitting sink unit
or a pre-existing top,
providing the dimensions of
the recess correspond to
those shown in the picture.
Proceed as follows:
-
Remove the machine’s worktop by unscrewing the two rear
retaining screws, pull from the front and slide out the rear
slots, lifting the worktop.
Insert the machine after adjusting height and levelling with the
adjustable feet. When inserting the machine, ensure that the
water inlet and drain hoses are not kinked or squashed.
IN26
820
570 - 600
600
IN05
