16
8b. Setting and starting the
programme with "delay start"
Once a programme and required options
have been selected (see point 8a.) to use
"delay start" proceed as follows:
Press the "delay start" push button.
The indicator light corresponding to the selected
hours (3,6, or 9) will illuminate.
The delay start will not modify the settings
made previously .
To set the time setting to zero press the
"delay start" push button the indicator lights of
the hours are off.
Press the "programme start" push button, an
audible signal will confirm the start of the
countdown and the indicator light corresponding
to the setted hours will flash.
Once the delayed time has elapsed the
programme will start automatically.
To stop a countdown in progress without
modifying the setting of the washing programme
and eventual options, press and keep pressed
for at least 3 seconds the "programme start"
push button.
9.
To cancel a programme in
progress
Press and keep pressed the "programme start"
push button for at least 3 seconds to cancel a
programme in progress.
An audible signal will confirm that the
programme under way has been cancelled.
The dishwasher will return to setting mode and
a new washing programme can be selected.
10. At the end of the washing
programme
The dishwasher will automatically stop and
an intermittent audible signal informs you
that the programme has ended (with the
delay start this audible signal is
automatically excluded).
All the indicator lights of the phases will turn
off, only the indicator light of the ended
programme remains illuminated.
The On/Off indicator light remains on until
the On/Off push button is depressed.
Open the door and wait a few minutes
before removing the dishes; in this way
they will be cooler and the drying will be
improved.
Empty the lower basket first and then the
upper one; this will avoid water dripping
from the upper basket onto the dishes in
the lower one.
Important!
In general it is not advisable to open the
door while the machine is working; if the
door is opened however, a safety device
ensures that the machine stops.
Care must be taken if the door is opened
during the hot phase or immediately
after a programme has finished, as
steam may escape.
When the washing programme has
finished, it is recommended that the
dishwasher is unplugged and the water
tap turned off.
SEQ39en