background image

1. On/Off indicator light 

2. On/Off pushbutton

On

By depressing this button the machine starts
operating and, at the same time the On/Off
indicator light illuminates.

Off

When the washing programme has finished, the
machine stops automatically and the pilot light
remains on.
To switch the indicator light off or to stop the
machine at any time, press this button.

3. Economy 55°C button

By depressing this button you will reduce the
temperature of the main wash from 65°C to 55°C,
with considerable energy saving (see “Washing
programmes” chart).

4. Door handle

To open the door press the catch in the top of the
recess and pull the door toward you at the same
time.
To close the door simply push it.

5. Programme marker

6. Programme selector dial

To select a programme, push the programme
selector dial in to make it pop out. Then turn it
clockwise, making sure that the programme
letter you wish to select is in line with the
programme marker on the control panel.

7. Programme sequence indicator

As the programme progresses, the sequence
indicator turns, to show the phase in the wash
programme the appliance has reached.

Prewash / Rinse and Hold

Wash

Cold rinse

Hot rinse

Hot air drying

8. Programme guide

This is a summary of the “Washing
programmes” chart to help you select the
correct programme.

The control panel

28

PCP01GB

1

2 3

4

5

6

7

8

Summary of Contents for DW 6826



























Reviews: