6. "Delay start" button
Allows the start of the programme to be delayed
by a minimum of 1 hour, up to 9 hours.
How to set the "Delay start":
When the button is pressed, the number "0"
appears in the display.
Press the button again to select the number of
hours by which you wish to delay the
programme start, up to a maximum of 9.
E.g.: if you have selected number "2", the wash
programme will start in 2 hours time.
To cancel the delay start set, press the button
until the number "0" appears.
Close the dishwasher door to start the
countdown: a long audible signal (about one
second) informs you that the function is active.
If you open the door you will see, in the display,
how long there is to go (in hours) before the
programme starts. A flashing dot in the digital
display means that the delay start function has
been activated.
Opening the door has no effect on a countdown
which has already been started.
If, during the countdown, you wish to see the
programme number selected in the display,
press the "Programme selector" button.
If, after having started the countdown by closing
the dishwasher door, you wish to cancel the
delay start, press the "Cancel/Programme
change" button for about 2 seconds until the
short "instruction accepted" signal is heard.
7. "Cancel/Change programme"
button
If you wish to cancel a programme which is
already running or a setting which has just been
made, press this button for about 2 seconds
until the short "instruction accepted" signal is
heard.
The number "1" for the first selectable
programme reappears in the display whilst the
programme selector light flashes, to indicate
that the dishwasher has been reset and that a
new programme and new options may be
selected.
8. Indicator light "WRD"
This pilot light comes on when the most
energetic programme is selected (nr. 2 Intensive
70°C programme) with hot prewash, suitable for
pans and particularly dirty crockery.
33
PCP12/1GB
Summary of Contents for DTI 6759 E
Page 27: ...3 07 99 ...
