Zanussi DTI 6726, Instruction Booklet

Page: 19 / 24

Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a
qualified plumber or competent person.
Technical specifications
Installation instruction
42
PTS08/1GB
DIMENSIONS Width 59.6 cm
Height 81.8 - 87.8 cm
Max depth 55 cm
Max depth with open door 111.4 cm
ELECTRICAL CONNECTION Voltage 230 V - 50 Hz
MOTOR RATING DURING WASH 200 W
POWER OF HEATING ELEMENT 2100 W
OVERALL POWER 2300 W
WATER SUPPLY PRESSURE Minimum 50kPa (0.5 bar)
Maximum 800kPa (8 bar)
CAPACITY 12 place settings
CONSUMPTION Water 20 l
Electricity 1.5 kW/h
Remove all packaging before positioning the
machine.
Building-in features
This dishwasher is designed to be fitted under a
kitchen counter or sink.
It is essential that the recess dimensions indicated
in the diagram are followed.
No further openings for venting of the dishwasher
are required, but only to let the water fill and drain
hose and power supply cable through.
The recess height may be anywhere between 820
and 880 mm from the floor since the dishwasher
incorporates adjustable levelling feet (max. 60 mm).
Adjust the height of the appliance by turning these feet.
A distance of 2 mm should be allowed between the
top of the dishwasher and the counter top.
Good levelling is essential for correct closure and
sealing of the door. When the appliance is correctly
levelled, the door will not catch on the levelling
spacers, either side of the cabinet.
If the door does not close correctly, loosen or
tighten the adjustable feet until the machine is
perfectly level.
818
÷
878
550
596
600
820
÷
880
II57
max