13
ELECTRICAL CONNECTIONS
The electrical connection of the
ceramic hob to the specially provi-
ded built-in switch box and to the
built-in range should only be carried
out by a trained technician.
During assembly the switch box and
the stove must be idle.
Connect cable-plug with appropriate receptacle fixed on
range or controlbox.
Furthermore attention should be paid to the assembly
instructions for the built-in switch box or oven with which
the hob is connected!
Protection against accidental contact must be ensured
by assembly.
If the hob is operated from a switch box then it is
necessary to have an intermediate bottom to ensure
protection against accidental contact!
The distance between the underside of the hob and the
furniture beneath must be at least 20 mm.
If the appliance is not connected by means of plugs,
then, at the time of installation, a device which makes it
possible to separate the appliance at all its terminals
from the mains by a gap of least 3mm must be added.
Arrangements of hob - built - in oven/switch box may be
looked-up in a special table which is an appendix to
these instructions.
Before installation and operation of the appliance the
range of possibilities for combining the hob with the oven
/switch box is to be checked by referring to the appropriate
instructions for installation and operation.
Using other hobs than those of the ZANUSSI -
BRAND excludes any liability.
If these regulations are not observed all given
approvals of test institutes are void.
Important for the disassembly of the hob
The supply of mains current to the appliance must be cut
off (for example by unscrewing the safety devices).
All manuals and user guides at all-guides.com
