background image

24

Something not working

Some functioning problems may be due to causes which can easily be solved before calling the

Network Service. Follow theses instructions:

Problem

Cause

Solution

A) LAMP AND INDICATORS

1. Green lamp does 

• Appliance not connected. 

• Plug it in.

not come on

• No power at mains socket. 

• Check the domestic automatic

(If available)

cut out.

2.Inner light (Refrigerator

• Appliance unplugged. 

• Plug the appliance into mains.

compartment) does not

• No power at mains socket. 

• Chek the domestic 

come on «H».

instalación doméstica.

automatic cutout.

• Bulb loose or burnt out. 

• Tighteen or substitute it fo

another of same rating.

• The appropiate «Temperature • Change to another position.

Regulator» is in position «

0

».

B) PERFORMANCE

1. The freezer or the refrigerator

• The appropiate «Temperature • Change to another position.

do not cool.

Regulator» is in position «

0

».

2. The freezer or the refrigerator

• Door not properly closed. 

• Close well.

do not cool enough.

• The door has been opened  

• Avoid frecuent opening.

frecuently.

• Inadequate position of  

• Change position to a cooler one.

«Temperature Regulator».

• Food has been introduced 

• The appliance will get back

recently in large quantities. 

to normal, wait.

3. Food gets frozen in the 

• «Temperature Regulator»

• Change position to less cold.

refrigerator.

on inadequate position. 

• Food touches the back walls

• Bring food forwards.

4. The motor does not stop 

• Temperature regulator

• Change position to less cold. 

running:

on inadequate position. 

• Door not properly closed. 

• Close the door correctly.

• Door opened frequently.

• Avoid frequent opening.

• Food has been put in 

• Wait for the appliance to come  

recently in large quantity.

back to normal.

Summary of Contents for 275















Reviews: