32
If the Dishwashing Results
are not Satisfactory
The dishes are still dirty.
•
The wrong dishwashing cycle was selected.
•
The dishes were loaded is such a way that the
dishwashing water did not reach all items. The
baskets for the dishes must not be overloaded.
•
The filters in the base of the washing compartment
are dirty or incorrectly positioned.
•
Good quality detergent was not used, or too little
was used.
•
In the case of scale deposits on the dishes: The
dishwasher salt dispenser is empty or the water
softening system has been incorrectly set.
•
The drain hose is incorrectly positioned.
•
Pollutants from the water in the dishwasher can
block the jets in the spray arms. You have the op-
tion of removing the spray arms from their fixture
for cleaning (see section “Care and Cleaning”).
The dishes do not dry and are not shin-
ing.
•
Poor quality rinse aid was used.
•
The rinse aid dispenser is empty.
There are smears, streaks, milky spots or
a shiny bluish coating on glasses and
dishes.
•
Lower rinse aid dosage.
There are dried water drops on the glass-
es and dishes.
•
Increase rinse aid dosage.
•
The detergent may be the cause. Contact the de-
tergent manufacturer's customer advice centre.
Glass corrosion
•
Contact the detergent manufacturer's customer
advice centre.