background image

Before installing and first using the dishwasher, read this instruction booklet carefully, including  its hints
and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using
the dishwasher are thoroughly familiar with its operation and safety features. Save these instructions and
make sure they remain with the dishwasher if it is moved or sold, so that everyone using it through its life
can be properly informed on appliance use and safety.

Installation and servicing

All installation and service work done on the product 
must be carried out by a qualified technician. Work 
performed by persons with inadequate knowledge may
adversely affect the satisfactory functioning of the 
product and may cause personal injury or damage. 
Before any work is carried out on the dishwasher, it 
must be isolated from the electrical supply. To do this 
the power plug must be removed from the wall socket.

Water connection should be made via an easily 
accessible tap.

The power cable must be plugged into an earthed 
socket, which must to be easily accessible. Permanent
installation must only be carried out by an authorised 
electrician or competent person.

If the power cable is damaged, it must be replaced 
by a Service Force engineer. Please contact your 
local service centre on 08705 929 929.

Make sure that the power cable is not nipped or other-
wise damaged and that the hoses do not get crushed 
or kinked when moving the dishwasher when installing
or cleaning etc.

Servicing and possible repairs must be carried out by 
a Service Force engineer. Always insist on genuine 
spare parts. Never try to repair the dishwasher yourself.

Child Safety

The dishwasher should be used by adults only. Do not
let children play with the controls or other parts of it.

Do not allow children to play with the packaking. Risk 
of suffocation.

Keep all detergents in safe place out of children´s 
reach.

Prevent children from sitting, swinging or standing 
on the open door.

During Use

This dishwasher is designed solely for washing house-
hold utensils suitable for machine washing. Using it for
other purposes could lead to physical injury or damage
to property and invalidate the guarantee.

Avoid opening the door while the dishwasher is running,
as hot steam may escape.

Only use detergent specifically designed for use in 
dishwashers.

Do not place sharp knives with their points upwards. 
It is much safer to lay them horizontally in the basket.

Ensure that the door of the dishwasher is always closed
when it is not being loaded or unloaded. In this way you
will avoid anybody injuring themselves on the open door.

If you take any dishes out of the dishwasher before the
end of the dishwashing cycle, it is extremely important
to rinse them thoroughly under running water to remove
any remaining detergent.

The water safety system protects against water damages.
The following requirements must be fulfilled:

- The dishwasher must be electrically connected when

it is switched off.

- The dishwasher must be correctly installed.

- Always shut off the water supply whenever the dish-

washer is left unattended for an extended period.

In the event of flooding or leakage, switch off the water
supply immediately by closing the stopcock and dis-
connect the power supply by unplugging the power cable
or removing the fuse. When removing the electrical 
plug, grip the plug, not the cable. Never touch the 
switch or plug with wet hands!

Conservation

- packaging:

All materials used in packaging this appliance are 
environmentally-friendly. The various plastics used are
identified and can be recycled:

PE stands for polyethylene, which is used for the 
bag around the appliance and the bag in which these 
instructions were supplied.

PS stands for polystyrene (moulded), which is used 
for the sections of packaging needed to cushion the 
appliance.

The cardboard components of the packaging are made
from recyclable paper and should be taken to a collection
point for recycling.

- old apparatus:

The symbol      on the product or on its packaging indicates
that this product may not be treated as household waste.
Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the
environment and human health, which could otherwise be
caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product,
please contact your local city office, your household waste
disposal service or the shop where you purchased the
product.

Safety information

- 3 -

822 61 11-27

Summary of Contents for ZSF 2440





















Reviews: