background image

- 10 -

Service

Service and Spare Parts

In the event of your appliance requiring service, or if you wish
to purchase spare parts, please contact your local Service
Force Centre by telephoning:

08705 929929 

Your telephone call will be automatically routed to the Service
Force Centre covering your post code area. 

For the address of your local Service Force Centre and further
information about Service Force, please visit the website at
www.serviceforce.co.uk

For Customer Service in Ireland please contact us at 
the address below:

Zanussi Electrolux
Electrolux Group (Irl) Ltd
Long Mile Road
Dublin 12
Republic of Ireland
Tel:  + 353 (0)1 4090751
Email: [email protected]

Before calling out an engineer, please ensure you have read
the details under the heading ”Something Not Working”.

When you contact the Service Force Centre you will need to
give the following details:

1.

Your name, address and post code

2.

Your telephone number

3.

Clear and concise details of the fault

4.

The model and serial number of the appliance 
(found on the rating plate affixed to the rear of the 
dishwasher).

5.

The purchase date

Please note that a valid purchase receipt or guarantee
documentation is required for in-guarantee service calls.

Customer Care Department

For general enquiries concerning your Zanussi Electrolux
appliance or for further information on Zanussi Electrolux
products, please contact our Customer Care Department by
letter or telephone at the address below or visit our website at
www.zanussi.co.uk

Major Appliances Customer Care Department
Zanussi Electrolux
Addington Way
Luton
Bedfordshire
LU4 9QQ
Tel: 08705 727727 *

* call to this number may be recorded for training purposes.

Summary of Contents for ZSF 2400

















Reviews: