Filling with rinse aid
12
Open the lid.
Fill up with rinse aid.
The maximum level for
filling is indicated by
"
max
"
.
Clean up any rinse aid
which overflows. Close
the lid and press until it
locks.
CAUTION!
Never fill the rinse aid dispenser with any other
substances (e.g. dishwasher cleaning agent, liquid
detergent). This would damage the appliance.
Adjusting the dosage of rinse aid
Increase the dose if there are drops of water or
lime spots on the dishes after washing.
Reduce the dose if there are whitish streaks
on the dishes or a bluish film on glassware or
knife blades.
Open the lid.
Set the dosage level.
(The dose is factory set
in position 4).
Close the lid and press
until it locks.
IMPORTANT!
Top up the rinse aid when the light on the
control panel illuminates.
156999 58/0en 17-03-2006 14:09 Pagina 12
