Inlet hose
Connect the inlet hose to a water tap with an external
thread of 3/4 .
The inlet hose can be turned either to the left or the
right to suit the installation by means of the locknut.
The locknut must be correctly fitted to avoid water
leaks.
Drain hose
Connect drain hose to
the sink. Secure it with
the supplied hose clamp.
Required height: 30 to
100 cm above bottom of
the dishwasher.
Ensure that the hoses
are not kinked, crushed
or entangled.
When connecting the
drain hose to an under
sink trap spigot,
the en-
tire plastic membrane
(A) must be removed
.
Failure to remove all the
membrane will result in
food particles building up
over time eventually
blocking the dishwasher
drain hose spigot.
If you use a drain hose extension the total
length should not be longer than 4 metres.
Likewise the internal diameter of the couplings
used for connections to the waste outlet must
be no smaller than the diameter of the hose
provided.
22
