background image

If you open the door during a programme, in order to
restart the programme you must press the Start/Pause
button again after having closed the door. The 
icon appears on the display above the relative button.

4 SPIN SPEED Button

Press this button repeatedly to change the value of
the spin speed.
This value appears on the display above the relative
button.
To do this you must know the real spin speed that
your laundry has been spunin the washing machine.
Depending on the type of laundry the spin speeds are
the follow:

- COTTONS: ........800-900-1000-1100-1200-1300

1400 1500-1600 rpm.

- SYNTHETICS: ..800-900-1000 rpm.

- BABY: ................800-900-1000-1100-1200 rpm.

If you do not know the exact laundry spin speed you
can choose blank (no value on the display). The
tumble dryer will dry the laundry using a default
factory drying cycle.
Using this option you could decrease the drying cycle
time, saving energy.
If you have selected a time controlled programme
(60 min. or 30 min.) you could not use this option
because it has been selected a fixed time of drying.
If you try to press this button a warning message
«Selection error» appears in the display.

5 OPTION, CHANGE and

EXIT Buttons

Option button

allows you to move through the

option icons.

Change

Options

Exit

Half Power

No

10.55

Door

Spin

Change button

allows you to select/change the status

of the different icons.

Exit button

allows you to return to the previous

selection.

Depending on the programme, different functions can
be combined. These must be selected after choosing
the desired programme and before pressing the
START/PAUSE button.
By depressing the «

Option

» button, all the symbol

icons, allowed for the selected programme, will
appear in the display.
The first option 

(Half Power) will start flashing.

Its name and status will appear on the display.
If you want to change the option status, press
«

Change

» button. A line will appear below the

selected icon, indicating that the option is set.
To select the other options press again the «

Option

»

button and proceed as before.
Once you have completed the selection of the options,
press the «

Exit

» button, the selected icons will remain

fixed on the display.

Note:

To modify the already chosen option selections,

repeat the previous procedure.

Important!

While selecting the option, if you press

the «

Spin

» or 

Start/Pause

button, or you turn the

selector dial, the relative function will be executed.

Half Power

Selecting this option allows drying to be performed at
a lower temperature, for delicate items. 
The corresponding 

icon appears on the display

during set up mode and the drying cycle.
A dash is shown under the relative icon to indicate
that the option has been selected.

Change

Options

Exit

Cotton extra

Cycle end at

08.30

10.55

1200

Door

Spin

Change

Options

Exit

Half Power

Yes

10.55

Door

Spin

6

125992770.qxp  2004-09-07  07:53  Page 6

Summary of Contents for ZDC 5355 W


























Reviews: