background image

Washing programmes

14

(1) Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil). 

This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and 
dinner crockery and cutlery.

(2) Testing programme for EN 50242 (see "Hints for Test Centres"). This programme, developed for the use of detergents with 

enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be 
obtained only with the 65°C programmes and conventional detergents. To compensate the lower temperature, the duration of 
washing and drying have been extended.

(3) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by 

the variations of the power supply.

Position 

of the

programme

selector dial

Degree of soil

and

type of load

Heavy soil. 
Crockery, cutlery,
pots and pans

Normal soil. 
Crockery and
cutlery

Programme

Cycle description

(3) Consumption values

Hot prewash
Main wash up to 70°C
2 warm rinses
1 hot rinse
Drying

Cold prewash
Main wash up to 65°C
1 cold rinse
1 hot rinse
Drying

Programme 

duration

(in minutes)

Energy

consumption

(in kWh)

Water

consumption

(in litres)

85 - 95

1,7 - 1,9

23 - 25

95 - 105

1,3 - 1,5

19 - 21

Any. 
Partial load (to be
completed later in
the day).

1 cold rinse (to avoid food
scraps from sticking
together). 
This programme does not
require the use of detergent.

12

0,1

4

Normal soil. 
Crockery and
cutlery

Cold prewash
Main wash up to 50°C
1 cold rinse
1 hot rinse
Drying

150

1,05

16

Fresh soil. 
Crockery and
cutlery

Main wash up to 60°C
1 hot rinse

30

0,8

9

Intensive 70°C

Rinse and Hold

(To set this programme, see

the below instructions)

(1) Quick 

60° A 30

I

(To set this programme, see

the below instructions)

Normal 65°C

(2) Eco 50°C

70°

60° A 30

I

60° A 30

I

65°

ECO

50°

Programme Quick 60° A 30

I

To set the Quick 60° A 30

I

washing programme, press this

button once. The indicator light of the corresponding button will
illuminate.

Programme Rinse and Hold

To set the Rinse and Hold washing programme, press this
button twice. The Rinse and Hold indicator light will illuminate,
while the indicator light of the corresponding button will be off.

Summary of Contents for DE6444





















Reviews: