32
1. Check that the baskets have been
loaded correctly and that the spray
arms can rotate freely
2. Turn on the water tap
3. Close the dishwasher door
4. Press the On/Off push button
The On/Off indicator light illuminates.
5. Setting and starting the programme
Press the push button of the programme you wish to
select. (See "Washing programmes" chart for the
number of the programme).
The corresponding indicator light illuminates and in the
digital display will flash the running time of the programme.
The indicator lights of the phases foreseen for the
programme will illuminate.
The start of the programme will occur automatically about
3 seconds after the last pressure of a push button.
Once the programme has started, in the digital display
the running time of the programme is no longer flashing
and the indicator lights of the phases will turn off except
for the phase underway.
6. To interrupt, change or cancel a
washing programme
Interrupt, change or cancel a washing programme in
progress ONLY if it’s absolutely necessary
To interrupt a washing programme
Attention! Hot steam may escape when the door is
opened. There is risk of scalding. Open the door
carefully.
●
Open the dishwasher door; the programme will stop.
Close the door; the programme will start from the
point in which it was interrupted.
●
pressing the On/Off (in this case all the indicator
lights turn off). Press the On/Off push button again;
the programme will start from the point in which it was
interrupted.
To change a washing programme
●
If you want to change the washing programme within
the 3 seconds before the start of the programme,
simply press the push button of another programme,
in the digital display will appear the running time of the
new programme.
●
If you want to change a washing programme in
progress, press per about 6 seconds the push button of
another programme. The indicator light of the new
programme illuminates and in the digital display appears
the running time of the new selected programme. (Once
changed the selection, the new programme will start
from the beginning).
To cancel a washing programme in progress
●
Press simultaneously the function push buttons 2 and
3 for about 2 seconds, all the indicator lights will turn off
(except for the On/Off indicator light) indicating that the
running programme has been cancelled and that the
machine has returned to setting mode.
It is now possible to select and start a new washing
programme.
7. Setting the "delay start"
The setting of the delay start occurs before selecting
the programme.
Setting the "delay start"
●
Press the On/Off push button.
●
Press the delay start push button until the flashing
number of the hours for the delay start appear in the
digital display.
●
Press one of the programme selection push buttons
and within 3 seconds select a washing programme.
In the digital display will appear for a moment the
running time of the programme and then will appear
the selected starting time again.
●
As soon as the number of hours is displayed without
flashing, the countdown for the delay start is active.
The countdown will decrease with steps of 1 hour.
●
The opening of the door during the countdown will not
modify the delay start.
●
Once the delay start has elapsed the programme will
start automatically.
To change the "delay start"
As long as the washing programme has not started, you
can change the number of hours for the delay start by
pressing the "delay start" push button.
To cancel the "delay start"
As long as the washing programme has not yet started,
you can cancel the delay start set by pressing the
"delay start" push button until in the digital display
appears the time duration of the selected programme.
The washing programme will start immediately.
To change a programme after the start of
the "delay start"
If you want to change the selected washing programme
after the start of the delay start you have to reset the
dishwasher by cancelling the previous setting (also the
setting of the delay start will be lost).
Press simultaneously the function push buttons 2 and
3 for about 2 seconds, all the indicator lights will turn off
(except for the On/Off indicator light) indicating that the
running programme has been cancelled and that the
machine has returned to setting mode.
It is now possible to select and start a new washing
programme.
Starting a washing programme
