5
Front View — Receiving Unit CV-57G-RX
HDMI-OUT: Connect to a HDMI display with a HDMI M-M cable here.
EQ: Adjust the 8-level equalization control knob to the received HDMI signals. 0 – 7 = strongest – weakest. It is
recommended to switch from 7 to 0 to find the optimal visual experience.
Rear View — Receiving Unit CV-57G-RX
RJ45-IN: Plug in a CAT-5/5e/6 cable that needs to be linked to the RJ-45 connector of the transmitting unit
CV-57G-TX.
+5V DC: Connect to 5V DC power supply.
1.
Connect your HDMI/DVI source (such as a Blu-ray Disc player) to the transmitting unit CV-57G-TX.
2.
Connect your HDMI/DVI display (such as a LCD TV) to the receiving unit CV-57G-RX.
3.
Connect your CAT-5/5e/6 LAN cable between the transmitting and receiving units.
4.
Make sure your CAT-5/5e/6 LAN cable is tightly connected and not loose.
5.
Plug in 5V DC power cord to the power jack of the receiving unit CV-57G-RX.
6.
Plug in 5V DC power cord to the power jack of the transmitting unit CV-57G-TX.
7.
If a flickering or a blinking image is seen, try to adjust the rotational switch to improve the cable skew. 0
stands for the strongest EQ while 7 stands for the weakest. Try adjusting the EQ from 7 to 0.
Hardware Installation
HDMI-OUT
EQ
RJ45-IN
+5V DC
