CONNECTING CABLES AND
POWER CHORDS
Read the following points to make the process safe and worry-free
• All electrical work must comply with applicable national, state and local electrical codes
• The appliance must be earthed properly with stable voltage rating
• While feeding the cable to terminal blocks and the circuit breaker, please make sure
that the metal wire ends and the terminal blocks touch completely. Then tighten the
screws to make sure that the full current supply can pass through.
• Before beginning any work on the electric installation, be sure that the main breaker
panel switch is OFF to avoid any danger of electric shock.
• All mounting and plumbing must be completed before proceeding with electrical
hook-up.
• Items needed for Installation:
3 x Pin Top Plug 16 Amps.
11